Walletinvestor digi plus

List of Contents of this article:

• 1,Walletinvestor digi plus How to turn off the Lenovo hard disk protection system?
• 2, Can you provide the download of Lenovo hard disk protection system EDU7.5.3?
• 3, Recovery of Lenovo Hard Disk Protection System
• 4, How to install Lenovo hard disk protection system
• 5, Lenovo hard disk protection system EDU8.0.2 and 9.0 installation tutorial (support Win10)
• 6, Lenovo computer startup suddenly The Lenovo hard disk protection system appears, prompting that the protection driver is not installed

How to turn off the Lenovo hard disk protection system?

Download the software. Open the software and select the hard disk. Choose to crack the protection card only. In this way, the Lenovo hard disk protection system has been canceled.

First, open the computer and click "Run" in the start menu bar in the lower left corner of the computer desktop. Then click to enter "cmd" in the pop-up window, and enter to confirm.

Lower the hard disk. It's best not to execute it under DOS, which is a waste of time. It is recommended to do it in environments such as XP or PE. Remove the hard disk, hang it on other normally used XP system computers, and format it with special low-level software. The software does not need to be installed, just open it and run it directly.

Method 1 When you start up and see the interface of the hard disk protection, you select the interface to enter the system. If you don't see it, it may be hidden.Press the Home button to enter the administrator menu, and select "Uninstall" to uninstall. If you want to clear the hidden partition, you need to use Lenovo's special tool HDtool.exe.

You can turn it off in the following ways: download a "hard disk protection Kexer" on the Internet. This software is not big, only more than 50 KB; open the software, select "only crack hard disk protection", and then click "OK" to restart the computer.

First, enter the Lenovo Huidun protection system. In the "System Tools" tab, remove the "Hide Boot Menu" item, and set the display time to be long enough (generally 30 seconds). After confirmation, exit Huidun and restart the computer.

Can you provide the download of Lenovo hard disk protection system EDU7.5.3?

1. If you don't have the corresponding resources, you can ask the local Lenovo service station to ask the engineer of the station whether the hard disk protection system version you need. You can check the Lenovo service station information in the link provided below, and use the telephone area code of your location to search.

2. Select item 2 here, and you can see the actual capacity of the USB flash drive to confirm. This is 28gb.Then select 3 to find the location of your installation package, which is placed in the gho folder. Then select 8 to find the edu6 ISO file. The key is to find the file, not necessarily item 8.

3. Dear Lenovo users, it may be that the version you installed does not match your system. You can check the relevant drivers and random software in the official website link provided below according to the host number for installation.

4. After restarting, you will see the installation interface of Lenovo hard disk protection system V0. Select "Install Now" and press Enter to continue. Select "Repartition Installation", (if your disk system uses FDISK file partition, you can select "Keep System Installation", otherwise you can only select "Repartition Installation".

Recovery of Lenovo Hard Disk Protection System

Reinstall the protection driver: You can download the latest protection driver from Lenovo's official website or the driver CD of Lenovo computer, and then follow the installation guide to install it. After the installation is completed, restart the computer, and there should be no more prompts.

First of all, try to restart the computer. Sometimes the problem can be solved by a simple restart. If there is still a problem after restarting, you can try to enter the BIOS setting interface of the Lenovo computer. In the BIOS setting interface, find the options related to the hard disk protection system and make sure it is enabled.

Check whether the correct installation medium is used: make sure you are using bootable operationThe system installation CD or USB drive, and the operating system image file on the medium is not damaged. Disable disk write protection: You can disable the disk write protection function in the BIOS settings.

How to install Lenovo hard disk protection system

1. Put in the Lenovo hard disk protection system EDU0 CD-ROM, restart the computer, press F12, and select to start from the optical drive.

2. After restarting, the system will automatically perform a bunch of operations without intervention. Just wait for the completion. The picture is as follows. After the system restarts automatically, you can see that a DOS is installed by default, and the upgrade is completed. Restart, press F4, and you can enter the Lenovo hard disk protection system, which is a great achievement.

3. First, plug in the USB flash drive, enter PE, and select item 10 to enter the boot.Then in the new page that opens, select 17 items to enter. Select item 2 here, and you can see the actual capacity of the USB flash drive to determine. Here is 28gb. Then select 3 to find the location of your installation package, which is placed in the gho folder.

4. If it still doesn't work, try to boot the USB flash drive or CD-ROM into PE, preformat the system disk under PE, and then start the hard disk installer to install (if the local hard disk is not recognized or the disk character is confused under PE, you need to restart first and enter the BIOS to change the working mode of the hard disk from AHCI or SATA to IDE or Com..., and then enter PE to identify it.

5. First, make a USB boot disk, and then copy the downloaded Lenovo win7 system iso file directly to the USB disk GHO directory, as shown in the figure below, and then enter the next step.

6. After the computer starts up, the installation interface of the Lenovo hard disk protection system will appear: Next installation: After confirmation, the Lenovo hard disk protection system will be turned off, and the installation interface will appear again when the computer is turned on again.

Lenovo hard disk protection system EDU8.0.2 and 9.0 installation tutorial (support Win10)

After the system automatically restarts, you can see A DOS has been installed by default, and the upgrade has been completed. Restart, press F4, and you can enter the Lenovo hard disk protection system, which is a great achievement.

After restarting, you will see the installation interface of Lenovo hard disk protection system V0. Select "Install Now" and press Enter to continue.Select "Repartition Installation", (if your disk system uses FDISK file partition, you can select "Keep System Installation", otherwise you can only select "Repartition Installation".

After the computer starts up, the installation interface of the Lenovo hard disk protection system appears: Next installation: After confirmation, the Lenovo hard disk protection system will be turned off, and the installation interface will appear again when the computer is turned on again.

When the Lenovo computer starts, the Lenovo hard disk protection system suddenly appears, prompting that the protection driver is not installed

The driver is lost or damaged: the hard disk protection system needs to The driver works normally. If the driver is lost or damaged, the system will not be able to recognize the hard disk protection system, resulting in a prompt.

First of all, try to restart the computer. Sometimes the problem can be solved by a simple restart. If there is still a problem after restarting, you can try to enter the BIOS setting interface of the Lenovo computer. In the BIOS setting interface, find the options related to the hard disk protection system and make sure it is enabled.

When Lenovo computer starts up, the Lenovo hard disk protection system suddenly prompts that the protection driver is not installed because there is a problem with the driver and needs to be checked. The specific steps to solve the problem are as follows: 1. First, open "My Computer", right-click the C drive, and then select the "Properties" option. 2, and then click the "Tools" option in the pop-up window.

Dear users: First, enter the Lenovo Huidun protection system. In the "System Tools" tab,Remove the "Hide Boot Menu" item and set the display time to be long enough (generally 30 seconds is enough). After confirmation, exit Huidun and restart the computer.

Go to the official website of your notebook to download the correct driver. If it is Lenovo's one-click installation driver plug-in, it will automatically install the driver you haven't installed after installation. I have only used IBM's notebook, and I haven't used anything else. I don't know if other manufacturers have this function, but it usually has it.

First, open "My Computer" and right-click on the C disk to open the "Properties" option. Then click to open the "Tools" option in the pop-up window. Then click to open the "Start Check" option in the pop-up window.