DigiPlus fair value

List of the catalog of this article:

• 1、engine anti-theft indicator
• 2,DigiPlus fair value How to remove the engine anti-theft indicator light
• 3, Does the anti-theft light stop by itself
• 4、 How to turn off the engine anti-theft indicator light?

Engine anti-theft indicator light

1. First, turn on the car, open the key to ensure the power-on state; then wait until the anti-theft system light on the instrument flashes, observe the instrument; then turn off the power of the car , wait for about ten minutes, and then turn on the power of the car;At this time, the anti-theft system light will flash, and then repeat the above operation three times.

2. Many models are equipped with engine anti-theft technology. The anti-theft indicator light of the engine is a small key inside the car, and the anti-theft indicator light is generally yellow and located on the dashboard of the car.

3. Many models are equipped with engine anti-theft technology. The engine anti-theft indicator light is a small key inside the car. The anti-theft indicator light is usually yellow and located on the dashboard of the car. When you turn off the ignition key after getting on the car, the indicator light will turn on and off. The indicator light indicates that the vehicle has engine anti-theft technology.

4. It means that the engine of the car has entered the anti-theft state, and the engine anti-theft has begun to work.

How to remove the engine anti-theft indicator light

You can turn off the power again and wait for a longer time before reconnecting. If the owner fails to try the last method, he/she needs to call a trailer to deliver the vehicle to the designated 4S store, or ask the maintenance personnel of the 4S store to come to the door.

First, turn on the car, open the key, and ensure the power-on state; then wait until the anti-theft system light on the instrument flashes, observe the instrument; then turn off the power of the car, wait for about ten minutes, and then turn on the car power; at this time, the anti-theft system light will flash, and then repeat the above operation three times. .

The anti-theft indicator light of the vehicle keeps flashing, indicating that the anti-theft system of the vehicle has been started and does not need to be manually released. If the owner must cancel this function, it is recommended to go to a professional repair shop to unplug the wiring harness of the anti-theft light.

According to the easy car, the engine anti-theft indicator light keeps flashing. The method is to disconnect the negative power of the battery for a period of time, wait for the engine protection data to be cleared before reconnecting. Generally, the power is cut off for about 10 seconds. If the same state cannot be fully discharged, it needs to be cleared again. At this time, just wait for a period of time.

It is normal for car engine anti-theft lights to flash at a frequency of 1 to 2 seconds. It shows that the engine of the car has entered the anti-theft state, and the engine anti-theft has begun to work. This is a normal phenomenon. There is no need for the owner to release it, and the power consumption is also negligible, which is no problem for the battery.

Will the anti-theft light stop by itself

1. The flashing of the anti-theft light indicates that the engine anti-theft has begun to work, which is a normal phenomenon, and the owner does not need to turn it off. Of course, it can also be turned off. Just unplug the tail of the lamp and plug it in.

2. If the engine is not completely turned off, the anti-theft light will not flash. It is necessary to check whether the vehicle is not completely turned off.

3. Under normal circumstances, the anti-theft light can't be removed if it keeps flashing, unless the battery of the car is unplugged, because the manufacturer set it like this when leaving the factory. As long as the car is locked and the anti-theft system is activated, the anti-theft light will flash. Or you can go to a 4S store or a professional auto repair shop and ask the repairman to unplug the wiring harness of the vehicle anti-theft light.

4. Generally, the anti-theft lights will flash automatically after locking the car. If there is no flashing, it may not be locked.Nowadays, almost all cars are equipped with electronic anti-theft engines. When the key is inserted into the ignition lock cylinder, if it is confirmed that the key is legal, the anti-theft lock will be verified with the engine. If the password verification is correct, the engine will be allowed to start.

How to turn off the engine anti-theft indicator light?

First, turn on the car, turn on the key, and ensure the power-on state; then wait until the anti-theft system light flashes on the instrument, observe the instrument; then turn off the power of the car, wait for about ten minutes, and then turn on the car power; at this time, the anti-theft system light will flash, and then repeat the above operation three times OK.

According to the easy car, the engine anti-theft indicator light keeps flashing. The method is to disconnect the negative power of the battery for a period of time, wait for the engine protection data to be cleared before reconnecting. Generally, the power is cut off for about 10 seconds.If the same state cannot be fully discharged, it needs to be cleared again. At this time, just wait for a period of time.

Insert the key into the ignition switch lock and rotate it to the ON position. If the password verification is successful, the warning light will be turned off to allow the engine to start.

Unlocking the vehicle with the remote control key can be turned off. After the anti-theft indicator light of the vehicle is activated, it will flash at a certain frequency, which is normal. At the same time, it proves that the anti-theft system of the vehicle is working normally. At the same time, the owner does not have to worry about the battery loss of power.