Bingo Plus stock

Solve the problem of stuck car engine hood Automobile is Bingo Plus stockone of the indispensable means of transportation in our daily life, but in the process of car maintenance, sometimes the engine hood is stuck. If the hood cannot be opened, the engine parts of the vehicle cannot be repaired or replaced, which will affect our daily life. This article will introduce some methods to help you solve the problem of stuck car engine hoods. 1. Check the most common reason for the hood to be stuck in the pull rod and lock is the problem of the pull rod and lock. The pull rod may be in trouble or the lock may not close abnormally, so that the hood cannot be completely closed. In this case, it may be necessary to repair the pull rod or lock, or readjust their position. Before checking, please check whether the hood is obviously damaged or deformed in order to better understand the possible problems.Two. Use lubricant to solve the stuck problem. If you still can't open the hood after checking the tie rod and lock, you can try to use lubricant to solve the problem. Spray lubricant (such as WD-40) on the buckle and pull rod, and then gently pull the pull rod until the hood opens. If you need more lubrication, you can try this method many times. When using lubricant, please be careful to avoid overusing it to avoid lubricant dripping on the engine or other car parts. 3. Tap the hood. If the hood is stuck, you can tap the hood gently to try to solve the stuck problem. Use rubber hammers or other softer knocking tools to avoid any damage to the hood. At the same time, you can operate with others to alternately tap to try to open the hood. AskNote that you should be careful in these knocking actions to avoid damage to other car parts or hoods. Four. Remove the front baffle. If none of the above methods can solve the problem of hood jamming, you can consider removing the front baffle. Usually, the front baffle is installed directly on the hood, so after removing it, you can easily access the buckle and tie rod. Use a screwdriver or other corresponding tools to open the screw fixing the front bumper, and then remove the front bumper so that the hood can be opened more easily. However, please note that the car engine should be turned off before operation to avoid safety risks. 5. Seek professional help. If you can't solve quantitative difficulties, it's best to find an experienced technician to help you solve the problem. Some car repair shops offer free hood opening service, and they may use professional tools to quickly open the hood.If you are sure that you can't solve the problem, please consider seeking professional help to avoid further damage. In summary, engine hood jamming is one of the common problems in automobile maintenance. If such a problem occurs, you can first check whether the tie rod and lock are working properly. If necessary, you can use lubricant and tapping to solve the problem. If these methods still don't solve the problem, you can try to remove the front panel or seek professional help. No matter which method you use, be sure to be careful to avoid any harm to the car or other people.

Contact Us
Phone：020-83484643