DigiPlus stock

The DigiPlus stockengine can't start (the car failed to start, it may be an engine problem) When you are about to go out, the car can't start, which makes people very irritable and uneasy.The most common reason may be that the battery runs out, but if the battery is sufficient but it still can't start, there may be a problem with the engine. The engine is one of the most important components of a car. The engine turns on and turns the starter to drive the vehicle forward. If the engine cannot start, the vehicle will not be able to run normally, which will bring a lot of inconvenience. Next, let's take a look at the reason why the engine can't start. 1. Power system problems Power system failure is usually the main reason why the engine cannot start. When the battery cannot provide enough power for the engine, the engine cannot be turned on. If you find that it still cannot be turned on normally after checking and recharging the battery, you need to check whether the battery cable, battery holder and connector are installed properly and look for other possible faults.Two. Fuel system failure Fuel system failure may be another common reason why the engine cannot start. If there is no oil in the fuel tank or the oil pump fails, the car cannot complete the start-up process. Other factors that may cause engine start failure include fuel filter blockage, electrocatalyst failure, etc. If this happens, a better fuel filter should be replaced and the electrocatalyst should be checked and repaired. 3. Ignition system failure Ignition system failure is also a major factor causing the failure of the car to start. The spark plugs on the battery and cable board may need to be replaced to ensure good electrical connection. In addition, the ignition coil itself may also fail, causing the engine to fail to start normally. Four. Mechanical failure Mechanical failure usually occurs when a car is driving or stopping. If your car is normalIf the engine suddenly turns off while driving, it is possible that the engine has a mechanical failure, such as crankshaft, camshaft, piston or connecting rod failure, etc. The reverse pressure generated by the car during operation may also damage some key parts of the engine, causing the engine to fail and fail to start normally. 5. System failure The electronic system of the car may fail, causing the engine to fail to start normally. For example, there may be a problem with the ECU electronic control unit, resulting in error instructions, causing the entire engine to fail to start. In this case, the vehicle should be sent to a professional repair shop for maintenance. No matter what kind of problem, there are many solutions. When the car can't start, the first thing we need to do is to find out the cause of the fault. Then we can take corresponding measures to solve the problem.If you have no relevant maintenance experience, you'd better send it to a professional car repair shop for inspection and repair.

Contact Us
Phone：020-83484643