DigiPlus stock

* Motorcycle engine temperature - Motorcycle engine heat becomes the focus issue Motorcycles,DigiPlus stock as a popular means of transportation, are becoming more and more popular. However, the operating performance of a motorcycle is closely related to the engine temperature, and the engine temperature is a key factor affecting the stability and life of the motorcycle. Therefore, how to reasonably control the engine temperature has become the focus of people's attention.First of all, let's understand the reasons for the temperature change of the motorcycle engine. The temperature in the combustion chamber of the engine is as high as thousands of degrees. Excessive temperature will cause excessive wear and early failure of the engine exhaust pipe, cylinder head, valve and piston and other parts, and even cause the vehicle to be unable to start. On the contrary, too low temperatures will also increase the speed of engine wear, poor oil lubrication, and even affect the performance of parts. During operation, most motorcycles will fluctuate to a certain extent due to different driving methods or working environments. So, how to control the engine temperature? The first thing to pay attention to is the water temperature gauge of the motorcycle. Most vehicles are equipped with water temperature gauges. The temperature below 100 degrees is the normal starting temperature of the vehicle, but when the water temperature reaches more than 100 degrees, it is necessary to be alert.It is recommended to try to keep the water temperature of the vehicle in the range of about 80 degrees to 90 degrees when driving, so that the engine can be in the best working state. If the temperature suddenly rises, you can stop to cool down, add water to cool down, adjust idling speed and other methods to avoid overheating the engine. Secondly, there are some details that need to be paid attention to in daily use. First of all, check the radiator of the vehicle. If the radiator is blocked or the surface is not clean, the engine temperature will continue to rise. Therefore, the radiator should be cleaned regularly and ensure that there is no foreign matter inside the radiator. In addition, you should also pay attention to the air inlet and out of the engine. If the air intake is blocked, it will directly affect the acceleration performance and temperature of the engine. Maintaining the air intake of the vehicle can effectively reduce the temperature of the engine. Finally, there is another tip, which is to warm up the engine before starting to drive.Preheating ensures that the engine can quickly reach the working temperature even in a low-temperature environment, avoiding ineffective combustion and prolonging the life of the engine. Before turning on the engine, it is recommended to stop and wait for a few minutes to keep the engine in a natural discharge state. Periodic slight rotation of the engine can help the oil pump advance oil and reduce wear and oil pumping time during start-up. This operation can also cut off the power supply of the motorcycle and make the engine reach a state that is more suitable for normal working temperature. Based on the above, controlling the engine temperature needs to start from many aspects. Reasonable control of the engine temperature of the motorcycle can effectively protect the engine and extend the service life of the motorcycle. Developing good usage habits and regular maintenance can keep the engine temperature of the motorcycle within the normal range and enjoy a more stable and comfortable riding experience.

Contact Us
Phone：020-83484643